Skip to content
US Home Costs

Kitchen & bath

Shower Remodel Cost 2026: $2,000–$9,000 Typical Range

Replacing the surround of one existing shower stall, drain left where it is, often clusters around $2,000–$9,000. A fixture swap costs less. A tile walk-in or a curbless floor costs more.

Updated October 10, 2026 · 18 min read · US Home Costs editorial desk

Planning range

One existing shower stall in a single-family bathroom, already a shower, surround replaced, a standard valve and trim, a framed door or the curtain the bid names, and labor in one price, with the drain left where it is. A fixture refresh that leaves the surround, a tile walk-in past this band, a curbless floor, a moved drain, and frameless glass the bid leaves out are separate.

Typical planning range $2,000 to $9,000. National spread $300 to $15,000.

DIY or hire
Hire the remodel. A retail surround the owner still has to set, waterproof, and connect is a different product, and it is not this installed rate.
Repair or replace
Refresh the valve and trim when the surround is dry and sound. Replace the surround when the shower that is already there has failed. Convert a tub on the tub-to-shower page. Remodel the bathroom when the vanity, the toilet, or the layout has to change too.

Replacing the surround of one existing shower stall in a US bathroom — already a shower, no tub coming out, the surround replaced, a standard valve and trim, and the labor in one price, with the drain left where it is — often clusters around $2,000–$9,000. That is the typical shower remodel cost. How much does a shower remodel cost in that scope? It is that installed stall, not a fixture swap and not a curbless floor. The cost to remodel a shower, for that stall, is the same band. Shower replacement cost, when the surround is what gets replaced, is that installed price. A walk-in shower cost, when the walk-in is tiled, is typically $6,000–$12,000, and that row replaces a prefab surround. The wider national spread, about $300–$15,000, covers a fixture refresh at the low end and a curbless floor at the high end. A tub that has to come out is the tub to shower guide. The rest of the bathroom is the bathroom remodel guide. A tank that cannot supply the new shower is the water heater guide. These are typical planning ranges, not a survey and not a quote.

This page is a remodel of a shower that is already in a single-family bathroom. A bid may call it a shower remodel, a shower replacement, or the cost to remodel a shower. The surround comes out or is covered by the system the bid names. A new surround goes in the same opening, or in a larger opening the bid names. It is not a tub coming out, which is the tub to shower guide. It is not a new vanity, a new toilet, and a new floor, which is the bathroom remodel guide. It is not a new tank, which is the water heater guide. A fixture swap that leaves a sound surround in place is a smaller product. This page prices it on its own row. It is not the typical band.

The price of the job is the surround and the labor that installs it. The type of surround is the first cut. Whether the drain stays is the second. A type row is a way to read one remodel. It is not a second bill. Price the opening the drawing names. A prefab surround and a tiled surround are ways to buy one stall. The tile replaces the prefab rate. It is not a second shower under a prefab price.

The rows below are ways to read one job. They are not added together. The type table is one installed remodel of a shower that is already a shower. The typical band is a standard stall with the surround replaced and the drain left where it is: the prefab row in full, and the tile row only up to $9,000. A fixture refresh replaces that rate. A curbless floor replaces it. Use an add-on row only for a line the type row does not include. A drain the proposal already moves is not a second drain. Frameless glass the proposal already includes is not a second door.

RemodelTypical installed cost
Fixture and trim, surround stays$300–$2,000
Prefab surround, same stall$2,000–$6,000
Tile surround or walk-in$6,000–$12,000
Curbless or custom rebuild$8,000–$15,000
Add-onTypical planning range
Drain moved, when the bid leaves it out$900–$1,100
Frameless glass, when the bid leaves it out$1,200–$3,000

The type rows replace one another. Do not add tile on top of a prefab row for the same stall. The add-on row is a line the type row left out. A framed door the surround price already includes is not the frameless row on top. A remodel that does not move the drain does not get the drain row.

A fixture and trim refresh — the surround stays — is typically $300–$2,000. Three hundred dollars is the floor of the row and the floor of the wider spread. Two thousand dollars is the top of the row and the typical floor. The whole row sits at or under the typical band. From $300–$2,000 the job is this refresh. It is not the typical surround with a discount. Two thousand can be this refresh at the top, or a prefab surround at the floor. Ask whether the surround is in the price. Do not add the prefab row on top of a refresh that left the surround in place.

A prefab surround on the same stall — acrylic or fiberglass, drain left where it is — is typically $2,000–$6,000. The floor of the row is the typical floor. Six thousand is $3,000 under the typical top of $9,000. The whole row sits inside the typical band. From $2,000–$6,000 the job is this prefab stall. Six thousand is also the floor of the tile row. Those are the same dollars and not the same job. One is prefab. One is tile. Ask which surround the bid is. Do not add the tile row on top of it.

A tile surround, or a walk-in in that same dollar band, is typically $6,000–$12,000. The overlap with the typical band is $6,000–$9,000. Six thousand is the tile floor and the prefab top. Nine thousand is the typical top and inside this row. From $6,000–$9,000 the job is inside the typical band and inside this row. From $9,000–$12,000 the job has left the typical band and stays inside the wider spread. Twelve thousand is $3,000 past the typical top and $3,000 under the wider top of $15,000. This is the tile job the typical band describes only up to $9,000, not through $12,000. Do not add the prefab row to this one.

A curbless floor, or a custom rebuild that changes the opening, is typically $8,000–$15,000. The overlap with the typical band is $8,000–$9,000. Eight thousand is $1,000 under the typical top and inside the tile row. Nine thousand is the typical top and inside this row. From $9,000–$15,000 the job has left the typical band and stays inside the wider spread. From $12,000–$15,000 the job has left the tile row and stays on this row. Fifteen thousand is the top of the row and the top of the wider spread. Nine thousand can be a standard stall at the typical top, or a curbless floor inside its row. Those are the same dollars and not the same job. Ask which opening the bid priced. Do not add the tile row under a curbless price for the same shower.

Shower remodel cost

Shower remodel cost is this page when the shower is already a shower and the labor is in the price. How much does a shower remodel cost, for that stall, is the same installed price. A bid that says shower remodel cost and a bid that says the cost to remodel a shower are the same dollars when the stall, the surround, and the labor match. The typical band, $2,000–$9,000, is one existing stall with the surround replaced and the drain left where it is. It is not a second product stacked on a type row you already have.

A surround-only number, with the labor left out, is not this page. The installed row includes the surround, the valve, the trim, and the labor. A warehouse price for the panels is a parts list. On the standard stall, the installed typical band is $2,000–$9,000. Do not add a panel price under an installed price for the same opening.

Cost to remodel a shower

The cost to remodel a shower is the installed price, not the price of a valve on a shelf. For one existing stall with the drain left in place, that cost is $2,000–$9,000. A bid that prices the fixtures and a bid that prices the surround are not the same number. Keep the surround in the number when the surround is what failed.

A drain the bid leaves out is typically $900–$1,100. Two thousand plus $900 is $2,900, inside the typical band. Two thousand plus $1,100 is $3,100, inside the typical band. Nine thousand plus $1,100 is $10,100, which is $1,100 past the typical top and inside the tile row, $1,900 under that row’s $12,000 top. A remodel that does not move the drain does not get this row. A drain the proposal already moves is not a second drain.

Shower replacement cost

Shower replacement cost is the surround of an existing stall, not a tub coming out and not a valve alone. When the surround is replaced and the drain stays, that cost is $2,000–$9,000. A replacement that leaves the surround and changes the valve and the trim is the fixture row, $300–$2,000. Two thousand is the top of that row and the floor of the typical band. Ask which one the bid is. A quote near $300 should say fixtures, not a new surround.

Frameless glass, when the bid leaves it out, is typically $1,200–$3,000. Two thousand plus $1,200 is $3,200, inside the typical band. Two thousand plus $3,000 is $5,000, inside the typical band and inside the prefab row. Nine thousand plus $1,200 is $10,200, which is $1,200 past the typical top and inside the tile row, $1,800 under $12,000. Nine thousand plus $3,000 is $12,000, the top of the tile row. A framed door the surround price already includes is not this row. A curtain is not the frameless row.

Walk-in shower cost

A walk-in shower cost is the tile row when the walk-in is the project, not a prefab insert someone renamed. That installed range is $6,000–$12,000. It replaces the prefab rate. It is not the typical band plus a second shower. The overlap with $2,000–$9,000 is $6,000–$9,000. From $6,000–$9,000 the job can be a high typical stall or a low walk-in. Ask which opening the bid priced. From $9,000–$12,000 the job has left the typical band and stays on the walk-in row. Twelve thousand is $3,000 under the wider top.

A prefab unit that stays inside the old stall is $2,000–$6,000, even when the bid calls it a walk-in. That row is inside the typical band. It is not the $6,000–$12,000 walk-in. A curbless floor is $8,000–$15,000 and replaces the walk-in row. The overlap of the walk-in and the curbless row is $8,000–$12,000. Ask whether the floor was rebuilt to drain. Do not add $6,000 under a walk-in price that was already tiled.

What the range includes

The typical band assumes one existing shower stall at a single-family house. The shower is already a shower. The surround is replaced. A standard valve and the trim are in. A framed door, or the curtain the bid names, is in. The labor is in. The drain stays where it is. The prefab row, $2,000–$6,000, is inside the band. The tile row is inside the band only from $6,000 to $9,000. A layout change for the rest of the bathroom is not in the band. A moved drain is not in the band. Frameless glass is not in the band. A curbless floor is not in the band. A tub coming out is not in the band.

How long the work takes depends on the surround, the drain, and what is behind the wall, and the bid’s schedule is the one that counts. These are not a day count on this page. A bathroom that is the only one in the house is a scheduling question for the bid, not a dollar line.

The floor of the wider spread, $300, is a fixture refresh. It is not a surround someone discounted. The top, $15,000, is a curbless floor at the top of that row. It is not the prefab row plus every add-on. Six thousand plus a moved drain at $1,100 plus frameless glass at $3,000 is $10,100. Ten thousand one hundred has left the typical band by $1,100 and stays inside the tile row, $1,900 under $12,000, and inside the wider spread, $4,900 under $15,000. Stacking those lines does not build the $15,000 job by itself. The $15,000 job is also the curbless row at its top, with no extra glass named. Treat a number above $15,000 as a larger rebuild, a full bathroom, or a shower the curbless line does not cover, and ask which one.

None of the bands include a drain move, when the bid leaves it out, typically $900–$1,100. Two thousand plus $900 is $2,900, inside the typical band. Nine thousand plus $1,100 is $10,100, $1,100 past the typical top and inside the tile row. A remodel that does not move the drain does not get this row.

None of the bands include frameless glass, when the bid leaves it out, typically $1,200–$3,000. Two thousand plus $1,200 is $3,200, inside the typical band. Nine thousand plus $3,000 is $12,000, the tile top. A framed door the surround price already includes is not this row.

None of the bands include a tub coming out, which is the tub to shower guide, often $2,000–$6,000 for one standard alcove in prefab. That whole band sits inside this typical band. Those are the same dollars and not the same job. One removes a tub. One replaces a shower that is already a shower. Tile on that conversion page is $6,000–$12,000, the same row as tile on this page. A curbless conversion on that page is $8,000–$15,000, the same row as a curbless floor here. Ask whether a tub came out. Do not add the conversion on top of a shower that was already a shower. Do not add this remodel on top of a conversion that already names the new shower.

None of the bands include the rest of a bathroom remodel, which is the bathroom remodel guide, often $10,000–$25,000 for a mid-range bath that keeps the layout. Ten thousand is $1,000 past the typical top on this page and inside the tile row, $2,000 under $12,000. Ten thousand is also the floor of that bathroom’s typical band. Those can be the same dollars and not the same job. One can be a shower near the top of the tile row. One is a bathroom. Two thousand plus $10,000 is $12,000, the tile top. That sum double-counts the shower if the remodel already includes a new surround. A remodel that already names a new shower is not this page on top. A shower that is the only thing changing is not the remodel’s fixture line. A cosmetic bathroom refresh on that page is often $3,000–$10,000. The overlap with this typical band is $3,000–$9,000. Those are the same dollars and not the same job. One can be a shower. One is paint, a toilet, and a vanity.

None of the bands include a new water heater, which is the water heater guide, often $1,400–$2,800 for a 40- to 50-gallon tank in the same spot. Two thousand plus $1,400 is $3,400, inside the typical band. Nine thousand plus $2,800 is $11,800, which is $2,800 past the typical top and inside the tile row, $200 under that row’s $12,000 top. Fourteen hundred is $600 under this typical floor and inside the fixture row. Twenty-eight hundred is inside the prefab row and inside the typical band. A tank and a prefab surround can share those dollars. Ask which one the bid is. A shower bid that leaves the old tank in place does not get the heater row.

The band is the installed price. A sale on the surround is not subtracted. Read the form before you take a number off the bid. A credit you have not received is not inside the planning range. This page does not price a sale, and it does not name a percentage of the cost that comes back at resale.

Warranties are part of the contract, and this page is not a reading of one company’s form. A shower warranty commonly splits the pan, the walls, and the workmanship, and a leak at a joint is a question for that form. Read it. The warranty is not a dollar line in the planning range.

A permit the city requires for the plumbing is a line on the bid. This page does not price a city’s fee on top of a complete price that already includes it. A permit the proposal already includes is not a second permit.

As a cross-check, not a bid: one existing stall with the surround replaced and the drain left in place is $2,000–$9,000, the typical band. A prefab surround is $2,000–$6,000. A tile surround or a walk-in is $6,000–$12,000. A curbless floor is $8,000–$15,000, and $15,000 is the top of the wider spread. A fixture refresh is $300–$2,000, under that band except at the shared $2,000 point. If a bid and that reading are far apart, the bid is a different surround, a moved drain, frameless glass, a tub coming out, a full bathroom, or a price that left the labor out.

What moves the price

DriverHow it changes the bid
SurroundA fixture refresh that leaves the surround is $300–$2,000. A prefab surround on the same stall is $2,000–$6,000 and sits inside the typical band. Tile or a walk-in is $6,000–$12,000, and the typical band includes that row only up to $9,000. A curbless floor is $8,000–$15,000 and replaces the tile row.
DrainA drain that stays is inside the type row. A drain the bid leaves unpriced is $900–$1,100. A drain the proposal already moves is not a second drain.
GlassA framed door is inside the surround row. Frameless glass, when the bid leaves it out, is $1,200–$3,000. Glass the proposal already includes is not a second door. A curtain is not the frameless row.
The tubA shower that is already a shower is this page. A tub that comes out is $2,000–$6,000 in prefab on the tub-to-shower guide, and tile or a curbless floor on that page uses the same dollar rows as tile and curbless here. Those are not a second copy of this shower.
The rest of the roomA mid-range bathroom that keeps the layout is $10,000–$25,000 on the bathroom remodel guide. A shower that is only the stall does not get that remodel on top. A remodel that already includes the shower does not get this page on top.
WaterA 40- to 50-gallon tank in the same spot is $1,400–$2,800 on the water heater guide. A shower bid that leaves the old tank does not get that heater on top.
AccessA first-floor stall the crew can reach is the remodel this page prices. A tight upper bath, a cast-iron pan that has to be broken out, and a high-cost metro can clear the top of the typical band on a straightforward prefab stall.

The surround is the first cut, and it is not a rate you add to itself. A prefab stall at $6,000 and a tile stall at $6,000 are the same dollars. They are not the same opening twice. Ask which material is in the price.

The drain is the second cut. Two thousand plus a move at $900 is $2,900, still inside the typical band. Nine thousand plus a move at $1,100 is $10,100, which has left the typical band and can still be a tile stall. The higher number is not a prefab stall that someone misread.

The same stall in a lower-cost area and in a high-labor city can sit at opposite ends of $2,000–$9,000 without either bid being wrong. Ask whether the surround is prefab, tile, a walk-in, or curbless, and ask whether the drain stays. A tub conversion when a tub is what has to change, a bathroom remodel that replaces the rest of the room, and a water heater that cannot feed the new shower are the projects that show up beside this one. Price them on their own pages. Two bids that disagree about the surround, the drain, and whether the labor is in are not the same job.

DIY or hire

Hire the remodel. The pan, the waterproofing, and the drain are the job. A weekend crew is most likely to miss a slope and a joint that is not sealed, and a leak shows up in the ceiling below.

A retail surround is a different product. It is not the installed rate on this page, and it is not a standard stall with the valve set and the door hung. The installed row is the pro price. On that stall, the job is $2,000–$9,000. That is the labor and the materials together. A shower remodel is a hire.

Do not skip the waterproofing to save a day. If you are pricing a stack of panels and a valve, and the old surround is still on the wall, you are pricing a contractor’s job without the crew. The person who remodels the shower should say what happens if the subfloor is soft when the base is supposed to go down.

Repair or replace

Refresh the valve and the trim when the surround is dry, the pan holds water, and the failure is the handle, the head, or the trim. That job is the fixture row, $300–$2,000. A quote near $300 should say fixtures, not a new surround. Two thousand can be that refresh at its top. It can also be a prefab surround at its floor. Ask which one the bid is.

Replace the surround when the shower that is already there leaks, the pan has failed, or the finish is the thing that has to change, and the vanity, the toilet, and the layout can stay. That job, with the drain left in place, is the typical band, $2,000–$9,000. A quote near $6,000 can be prefab at its top or tile at its floor. Ask which surround the bid is.

Convert a tub when the tub is what has to change. That job is the tub to shower guide, typically $2,000–$6,000 for one prefab alcove. Those dollars sit inside this typical band and are not this shower. Replace the bathroom, in the sense of a remodel, when the vanity, the toilet, or the layout has to change. That job is the bathroom remodel guide, typically $10,000–$25,000 for a mid-range bath that keeps the layout. A tank that cannot feed the shower is the water heater guide. If the same season includes any of those, they are separate scopes. Do not fold them into the shower price.

How long a new surround lasts is not a number on this page. A prefab wall is not a warranty that a leak will miss the ceiling below. A tiled curb is not a warranty that the drain will stay clear. The bid’s scope is the work you bought.

How to use this number

Ask two or three contractors for a written price that names the opening, whether the drain stays, whether the price is a lump sum, whether the surround, the valve, the trim, the door, and the labor are all included, which material the walls are, and what happens if the subfloor is soft. Compare one existing stall, surround replaced, with $2,000–$9,000. Compare a fixture refresh with $300–$2,000, a prefab surround with $2,000–$6,000, tile or a walk-in with $6,000–$12,000, and a curbless floor with $8,000–$15,000. Keep the materials and the labor inside those rows. Put a left-out drain move at $900–$1,100, and left-out frameless glass at $1,200–$3,000, on their own lines.

A very low bid on one stall is a reason to ask whether the labor and the surround are both included, not a reason to celebrate. A quote near $300 should say fixtures, not a new surround. A quote near $2,000 should say whether the surround is in. A high bid should point at tile, a walk-in, a curbless floor, a moved drain, frameless glass, a soft floor, or the labor market. Two or three local bids on the same opening, the same surround, and the same drain are the number that matters. How this site sets the band is explained on the methodology page.

Common questions

Answers describe national planning ranges, not your house.

What is the shower remodel cost?

A typical planning range for the shower remodel cost is $2,000 to $9,000 for one existing stall, inside a wider spread of roughly $300 to $15,000. That scope is a shower that is already a shower, the surround replaced, a standard valve and trim, and the labor, with the drain left where it is. A prefab surround on that stall is $2,000 to $6,000 and sits inside the band. A tile surround or a walk-in is $6,000 to $12,000 and replaces the prefab rate. A fixture refresh that leaves the surround is $300 to $2,000 and replaces the whole row. These are typical planning ranges, not quotes.

How much does a shower remodel cost?

How much a shower remodel costs, when the stall matches, is the same planning range. One existing stall with the drain left in place is typically $2,000 to $9,000. A prefab surround is $2,000 to $6,000. A tile surround is $6,000 to $12,000. A curbless floor is $8,000 to $15,000. A price for the panels alone, with the labor left out, is not this cost. These are typical planning ranges, not quotes.

How much does it cost to remodel a shower?

The cost to remodel a shower is the installed price, typically $2,000 to $9,000 for one existing stall when the drain stays. A bid that says shower remodel cost and a bid that says the cost to remodel a shower are the same dollars when the stall, the surround, and the labor match. A moved drain, when the bid leaves it out, is $900 to $1,100 on its own line. Frameless glass, when the bid leaves it out, is $1,200 to $3,000 on its own line. These are typical planning ranges, not quotes.

What is the shower replacement cost?

Shower replacement cost, when the surround of an existing stall is what gets replaced and the drain stays, is the typical band of $2,000 to $9,000. A replacement that is only the valve and the trim, with the surround left in place, is $300 to $2,000 and replaces that band. A tile replacement is $6,000 to $12,000. Two thousand dollars can be a fixture refresh at its top or a prefab surround at its floor. Ask which one the bid is. These are typical planning ranges, not quotes.

How much does a walk-in shower cost?

A walk-in shower cost, when the walk-in is tiled or the opening is the project, is typically $6,000 to $12,000. That row replaces the prefab rate. The overlap with the typical band is $6,000 to $9,000. From $9,000 to $12,000 the walk-in has left the typical band and stays inside the wider spread. A prefab unit that stays inside the old stall is $2,000 to $6,000, even if the bid calls it a walk-in. A curbless floor is $8,000 to $15,000 and replaces the walk-in row. These are typical planning ranges, not quotes.

Ranges for work that often shows up in the same season as this project.