Skip to content
US Home Costs

Plumbing

Faucet Repair Cost in 2026: Leaky Faucet Fix Prices

The national average cost to repair a leaky faucet is $270, with most homeowners spending between $100 and $400 for standard parts and professional labor.

Updated November 10, 2026 · 14 min read · US Home Costs editorial desk

Planning range

National average ranges assume a professional plumbing service visit to repair a single dripping or malfunctioning faucet, including basic diagnostic time, standard replacement internal components, and professional labor fees.

Typical planning range $100 to $400. National spread $60 to $400.

DIY or hire
Simple repairs like replacing worn rubber O-rings, washers, or accessible cartridges can be completed DIY for $5 to $35 in parts using basic hand tools. Professional repair is recommended for wall-mounted fixtures, extensive corrosion, or integrated valve issues to prevent hidden water leaks.
Repair or replace
Repairing a faucet makes sense if the fixture is high-end, under ten years old, or only requires basic internal seals or cartridges. Replacement is recommended if the body is corroded, parts are obsolete, or repair costs exceed 50% of a new fixture installation.

Plumbing leaks represent one of the most common residential maintenance issues across the United States. A single dripping faucet can waste over 3,000 gallons of water per year, causing a visible increase in monthly utility bills while risking localized moisture damage to cabinetry, countertops, and flooring. For 2026, the national average faucet repair cost is approximately $270, with most homeowners spending between $100 and $400 per service visit. Minor DIY fixes involving basic washers or seals can cost as little as $5 to $35 in materials, whereas complex repairs on high-end kitchen fixtures or wall-mounted bathtub valves can reach up to $400 when performed by a licensed plumber.

Understanding how much does it cost to fix a leaky faucet requires looking at several distinct variables: the specific fixture type, the failure mechanism, local hourly plumbing rates, and part availability. Minor repairs—such as swapping a standard rubber O-ring or clearing a mineral-clogged aerator—occupy the lower end of the pricing spectrum. Conversely, resolving internal cartridge failures on custom wall-mounted tub spouts or replacing corroded brass supply connections involves specialized diagnostic labor that pushes prices higher.

Faucet Repair Cost at a Glance

The overall price range for fixing a faucet spans from basic single-component swaps to complex diagnostic service calls. The following table highlights standard national cost benchmarks for professional faucet repair services across typical residential setups.

Service TierPrice Range (Parts & Labor)Typical Scenario
Low-End / Simple Repair$60 – $100Replacing basic rubber washers, O-rings, or cleaning a clogged aerator
National Average$270Standard single-faucet cartridge replacement by a licensed plumber
Typical Professional Range$100 – $400Standard service call including diagnostic fee, internal seal replacement, and labor
Complex / High-End Repair$300 – $400+Repairing multi-handle bathtub valves, wall-mounted fixtures, or aged brass assemblies

Faucet Repair Cost by Fixture Location

The location of a leaky faucet directly impacts the total repair bill due to differences in physical access, valve complexity, and standard hardware design. A simple bathroom vanity sink allows quick access underneath the basin, whereas a bathtub spout or shower valve often requires navigating tight access panels or operating behind finished tile walls.

Faucet LocationTypical Repair Cost RangePrimary Cost Factors
Bathroom Sink Faucet$60 – $200Easy access; standard cartridge or washer configurations
Kitchen Sink Faucet$100 – $250Integrated spray hoses, pull-down mechanisms, and soap dispensers
Bathtub Faucet$60 – $400In-wall valve access, diverter stem wear, tile preservation
Shower Faucet / Valve$75 – $200In-wall cartridge replacement, pressure-balancing valve stems
Outdoor Hose Bib / Sillcock$100 – $300Freeze-proof valve replacements, exterior siding access, rusted pipe stems

Bathroom Sink Faucet Repair Cost

Fixing a bathroom sink faucet typically ranges from $60 to $200. These fixtures generally feature simple single-handle or dual-handle designs mounted directly onto the porcelain or quartz countertop. Because underneath access to the shutoff valves and flexible supply lines is straightforward, plumbers can diagnose and swap internal cartridges or seat washers rapidly.

Kitchen Faucet Leak Repair Cost

The average kitchen faucet leak repair cost falls between $100 and $250. Modern kitchen faucets frequently feature commercial-style pull-down sprayers, internal swivel spouts, single-lever ball mechanisms, or electronic touch-free sensors. The higher complexity of internal water channels and wear on flexible pull-out hoses adds to the repair time and component costs compared to basic vanity faucets.

Leaky Bathtub Faucet Repair Cost

A leaky bathtub faucet repair cost ranges from $60 to $400 depending on whether the leak originates from the tub spout diverter stem or the primary valve body behind the wall. Simple diverter replacement spouts are inexpensive, but replacing an internal two-handle or three-handle tub valve stem embedded behind ceramic tile requires specialized tools and longer labor hours.

Outdoor Faucet and Hose Bib Repair Cost

Repairing an exterior spigot, hose bib, or frost-free sillcock usually costs between $100 and $300. Outdoor spigots are prone to winter freeze damage, corrosion, and heavy thread wear. If the internal shutoff stem is cracked behind the exterior wall boundary, the repair may involve light demolition of drywall or exterior access panels to solder or thread a new assembly into the main supply branch.

What moves the price

Several core factors dictate where your final repair bill will fall within the national cost spectrum. Plumbing repairs are rarely charged as simple flat fees; they combine diagnostic labor time, specific component costs, and site-specific accessibility challenges.

1. Type of Faucet Mechanism

The mechanical architecture of the faucet determines the cost and complexity of the replacement components:

  • Compression Faucets: Found primarily in older homes, these use rubber washers pressed against a metal valve seat. Washers cost only $1 to $5, but manual seat grinding or stem refurbishment can take extra labor time.
  • Ball Faucets: Common in single-handle kitchen sinks, these use a rotating metal or plastic ball over rubber seals and springs. Repair kits run $10 to $25, requiring moderate disassembly.
  • Cartridge Faucets: Widely installed in modern homes, these rely on plastic or brass cartridges that slide into the valve body. Cartridge replacement parts range from $10 to $100 based on the manufacturer.
  • Ceramic Disk Faucets: Premium modern fixtures use dual ceramic disks that slide across one another. Ceramic disks are highly durable but disk cartridges cost between $20 and $50 for replacements.

2. Extent of Water Damage and Corrosion

If a dripping faucet has been left unchecked for months, hard water minerals can bind internal brass components together, requiring delicate extraction to avoid snapping internal plumbing threads. Furthermore, hidden leaks under a kitchen cabinet can rot subflooring or base cabinets, introducing auxiliary carpentry or surface remediation expenses.

3. Emergency vs. Standard Service Scheduling

Booking a scheduled appointment during standard business hours yields the standard $45 to $200 hourly labor rates. However, if a burst faucet mechanism requires emergency trip calls on weekends, holidays, or after-hours, base service dispatch fees often double, pushing total repair costs to $300 to $600 for a single visit.

4. Accessibility and Mounting Configuration

Under-sink cabinet layouts packed with garbage disposals, reverse osmosis water filtration systems, or instant hot water dispensers increase the time a technician spends reaching shutoff valves. Wall-mounted lavatory spouts or vessel sink elevated stems also demand greater precision during teardown and reassembly.

Component and Material Breakdown

When evaluating a line-item estimate from a plumber, the hardware components themselves represent only a portion of the overall cost. The following table provides typical retail and wholesale costs for common replacement hardware components:

Hardware ComponentAverage Retail Part CostFunction in Faucet Assembly
O-Rings & Rubber Washers$1 – $5 per packCreates watertight seals between moving joints and valve seats
Aerator$5 – $15Regulates stream flow, prevents splashing, filters debris
Standard Cartridge Stem$10 – $50Controls water volume and hot/cold mixing in mid-grade faucets
Premium Brass / Ceramic Cartridge$40 – $100Specialized internal mixing valve for designer or imported fixtures
Diverter Valve Stem$15 – $40Redirects water flow from tub spout to showerhead
Flexible Braided Stainless Supply Lines$10 – $25 per pairConnects wall shutoff valves to the faucet shank

Labor Rates and Service Call Structure

Understanding how professional plumbers bill their time helps clarify why a $5 rubber ring results in a $150 to $270 final bill. Plumbing labor across the United States generally costs between $45 and $200 per hour, depending on state licensing standards, master vs. journeyman status, and local cost-of-living adjustments.

Minimum Service Call Fees

Most professional plumbing contractors establish a minimum service trip fee ranging from $75 to $150. This fee covers vehicle fuel, dispatch administration, vehicle insurance, and the technician's initial 30 to 60 minutes of diagnostic time. Even if a technician completes a simple washer swap in 15 minutes, the invoice will reflect the mandatory minimum trip fee.

Flat-Rate vs. Hourly Billing

  • Flat-Rate Pricing: Many national residential plumbing firms charge standard flat-rate pricing based on task categories (e.g., "$175 for standard cartridge replacement"). Flat-rate pricing offers cost predictability upfront, regardless of minor delays.
  • Hourly Rates: Independent local plumbers often bill for actual time spent plus the marked-up price of materials. If an old faucet stem is seized by limescale and takes two hours to safely extract, hourly billing will reflect that additional labor time.

DIY or hire

Deciding whether to attempt a DIY repair or hire a licensed professional depends on your mechanical comfort level, the age of the fixture, and water supply isolation capabilities.

When DIY Makes Sense

Handling a dripping faucet repair yourself is entirely feasible if:

  • The shutoff valves under the sink are fully functional and turn off cleanly.
  • The faucet model is standard (Delta, Moen, Kohler, Price Pfister) with widely available replacement cartridges at local hardware stores.
  • The issue is limited to top-side leaks, worn spout aerators, or handle Play.
  • You possess basic plumbing tools: an adjustable wrench, Allen wrenches, needle-nose pliers, plumber's silicone grease, and thread sealant tape.

Estimated DIY cost: $5 to $40 for replacement parts and basic supplies.

When to Hire a Professional

You should call a licensed plumber if:

  • Under-sink shutoff valves are frozen, corroded, or leaking around their own stems.
  • The fixture is custom, imported, or obsolete with no clear part numbers.
  • The leak is originating behind a tiled shower or bathtub wall.
  • Attempts to loosen retaining nuts risk breaking older copper water pipes.
  • The faucet body shows hair-line stress cracks in the cast brass housing.

Plumbing errors can lead to sudden high-pressure water releases, causing thousands of dollars in hidden floor, ceiling, or cabinet framing damage. Reviewing general plumber cost baselines can help you gauge local trip charges before scheduling.

Repair or replace

Homeowners frequently face the dilemma of whether to invest money into repairing an existing faucet or replacing it entirely with a brand-new fixture.

Is the faucet body corroded, cracked, or over 10-15 years old? /
YES NO /
REPLACE THE FAUCET Is the repair cost over 50% (Total: $200 - $600 parts+labor) of a new fixture replacement? /
YES NO /
REPLACE IT REPAIR IT ($60 - $400)

The 50% Rule

If the estimated cost to repair an existing faucet exceeds 50% of the total cost to supply and install a brand-new fixture, replacement is generally the smarter financial decision. A basic faucet replacement installed by a plumber typically runs between $200 and $600 total (including a new $100 to $250 mid-grade fixture plus labor). Investing $200 to repair a 12-year-old budget faucet yields diminishing returns compared to installing fresh hardware backed by modern manufacturer warranties.

Summary Checklist for Repair vs. Replace

CriteriaFavor RepairingFavor Replacing
Fixture AgeUnder 8 to 10 years oldOver 10 to 15 years old
Fixture ValueHigh-end designer or solid brass constructionContractor-grade standard plastic/thin brass
Part AvailabilityStandard stock cartridge available locallyDiscontinued or special-order import parts
Physical ConditionClean finish; smooth handle movementsPitted chrome, flaking finish, scale buildup
Frequency of FailureFirst leak eventRepeated stem or seal failures within 12 months

If whole-house water pressure issues or aging distribution pipes are contributing to recurring fixture failures, consult our broader guides on whole house repipe options to address underlying plumbing infrastructure.

Hidden and Extra Costs

Initial plumbing quotes for fixing a faucet occasionally omit peripheral expenses that surface during the diagnostic teardown.

1. Frozen Under-Sink Shutoff Valves

If the secondary shutoff valves beneath the sink basin have not been turned in years, they may freeze open or break when forced. Replacing two standard under-sink angle stop valves adds $75 to $150 to the final service bill.

2. Supply Line Replacement

Flexible supply lines connecting the shutoff valves to the faucet shanks undergo constant water pressure. Plumbers routinely recommend replacing older rubber or plastic flex lines with braided stainless steel lines during a repair visit, adding $20 to $50 in materials and minimal labor.

3. Hard Water Scale Remediation

Homes supplied with unconditioned hard water frequently suffer from rapid mineral accumulation inside faucet bodies. Lime and calcium buildup can cement cartridges into place, requiring specialty chemical descaling or puller tools. If unmitigated mineral wear is damaging your home's appliances, reviewing water softener installation costs can help protect new fixtures long-term.

4. Cabinet Structural Repairs

If a slow kitchen faucet leak remained undetected beneath the sink basin, water may have saturated the particle board base cabinet floor. Replacing moldy or warped cabinet bottoms or addressing subfloor wood rot requires independent handyman or carpentry services ranging from $150 to $500.

How to Save Money on Faucet Repairs

While plumbing rates remain firm across regional markets, strategic planning can significantly reduce out-of-pocket expenses for fixture maintenance.

  • Group Plumbing Tasks: Plumbers charge a baseline minimum trip fee ($75–$150). If you have a dripping bathroom faucet, inspect your home for secondary issues—such as running toilets, slow drains, or a dripping hose bib. Having a plumber address multiple small repairs during a single visit spreads the trip fee across several tasks.
  • Identify Your Faucet Model Ahead of Time: Look for brand logos (Moen, Delta, Kohler) etched onto the spout base or handle cap. Locating model numbers or taking photos before the plumber arrives helps ensure they carry the exact replacement cartridge on their truck, avoiding extra part-sourcing trip fees.
  • Check Manufacturer Warranties: Major domestic brands often offer limited lifetime warranties to the original homeowner covering internal mechanical parts. Companies will frequently ship free replacement cartridges directly to your door, saving you $20 to $80 in component charges.
  • Clear the Work Area: Save the plumber time by completely emptying the storage space under the sink before they arrive. Providing clear physical access allows the technician to work immediately without spending billable time moving household cleaning supplies.

How to Hire a Plumbing Contractor

Selecting the right professional ensures high-quality workmanship and prevents future water leaks. Follow these steps when vetting local contractors:

Verification Checklist

  1. Verify Licensing: Ensure the technician or firm holds an active state or municipal master/journeyman plumbing license.
  2. Confirm Insurance: Ask for proof of general liability insurance and workers' compensation coverage (minimum $500,000 policy liability threshold recommended).
  3. Inquire About Warranties: A reputable plumbing contractor typically offers a 30-day to 1-year warranty on labor alongside manufacturer hardware warranties.
  4. Check Service Pricing Structure: Clarify whether the firm charges flat-rate book pricing or hourly labor plus materials before work commences.

Key Questions to Ask

  • Does your estimate include diagnostic service fees and cleanup?
  • If the internal valve casing is damaged, will you convert the job to a replacement quote?
  • Are replacement cartridges backed by a labor guarantee if the drip returns?
  • Will you inspect the flexible supply lines and under-sink shutoff valves during the visit?

Regional and Climate Notes

Geographic location and environmental conditions play a significant role in both plumber labor pricing and fixture wear patterns.

Cold Climate Considerations

In northern US regions subject to deep freeze events, outdoor hose bibs and sillcocks require specialized freeze-proof valves that extend 8 to 14 inches into the heated thermal envelope of the home. Repairing freeze-damaged exterior spigots in winter months often involves interior wall access, pushing outdoor faucet repair costs to the higher end of the range ($200 to $350).

Hard Water Impact

Regions with high mineral concentrations in ground municipal water (such as the Southwestern and Midwestern US) experience accelerated internal component degradation. Calcium deposits score ceramic disks and tear rubber O-rings prematurely. Homeowners in high-grains-per-gallon water areas may find themselves repairing cartridges every 3 to 5 years compared to 8 to 10 years in soft water zones.

Regional Labor Rate Disparities

Labor rates vary dramatically between major metropolitan regions and rural counties:

  • High-Cost Metro Areas (e.g., New York, San Francisco, Chicago): Hourly plumbing labor ranges from $125 to $225/hr, bringing basic faucet repairs to $200–$400.
  • Mid-Sized Metro Areas & Suburbs: Hourly labor averages $75 to $130/hr, keeping average repairs near the national $270 midpoint.
  • Rural Regions: Hourly labor typically spans $45 to $85/hr, resulting in total repair bills of $100–$190.

Signs You Need Faucet Repair

Detecting early indicators of fixture failure helps homeowners address problems before catastrophic leaks or costly structural water damage occur.

  • Persistent Spout Drip: Water continuing to drop from the spout after the handle is firmly shut indicates a worn stem washer, damaged O-ring, or deteriorated cartridge seal.
  • Leaking Around Handle Base: Water pooling at the base of the faucet body when turned on signals worn internal o-rings or loose packing nuts.
  • Reduced Water Flow / Sputtering: Uneven water pressure or sputtering sounds usually stem from mineral buildup inside the aerator or failing internal diverter valves.
  • Squeaking or Stiff Handles: Handles that require heavy physical force to turn point to mineral encrustation or dried-up plumber's grease inside the mixing cartridge assembly.
  • Unexplained Water Under Cabinet: Moisture accumulating inside the vanity floor indicates failing supply line connections, cracked shank housings, or worn under-sink mounting seals.

Common questions

Answers describe national planning ranges, not your house.

How much does it cost to fix a leaky faucet on average?

The national average cost to fix a leaky faucet is approximately $270 per service visit. Most standard professional repairs fall between $100 and $400 for parts and labor. Simple DIY fixes like replacing a basic washer or O-ring can cost under $30 in materials.

Is it cheaper to repair or replace a leaking faucet?

Repairing a faucet is generally cheaper upfront if the fixture is under ten years old and only requires a standard cartridge or seal replacement ($100 to $250). However, if the faucet is old, corroded, or the repair estimate exceeds half the cost of a new fixture installation ($200 to $600 total), replacing it is often the more cost-effective long-term solution.

How long does a plumber take to repair a faucet?

A qualified plumber typically takes between 45 minutes and 2 hours to diagnose and repair a standard sink or bathtub faucet. The timeline may extend if the home has corroded shutoff valves, custom wall-mounted fixtures, or if hard water deposits require extra time to extract internal parts safely.

Why does a brand-new repair cartridge still drip?

If a faucet continues to drip after installing a new cartridge, the metal valve seat inside the faucet housing may be pitted or corroded, preventing a tight seal. Alternatively, debris in the water supply lines may have damaged the new seals during installation, or the handle retaining nut may be tightened improperly.

Can a dripping faucet increase my monthly water bill?

Yes, a steady dripping faucet can waste between 180 and 3,000 gallons of water per year depending on the speed of the leak. This waste translates to a noticeable increase in monthly utility costs, alongside the risk of water stains and cabinet damage if left unchecked.

Ranges for work that often shows up in the same season as this project.