Garage Door Spring Replacement Cost 2026: $150–$350 Typical

Replacing the torsion springs on one sectional garage door at a single-family house — the springs and the labor in one price, on a weekday, with a door the technician can reach — often clusters around $150–$350. That is the typical garage door spring replacement cost. How much does it cost to replace a garage door spring in that scope? It is those springs, not a new door and not an opener. Garage door spring repair cost, when the spring is broken and the labor is in the price, is the same band. Garage door spring cost, when the labor is in the price, is the same band. Torsion spring replacement cost, for that same visit, is the same band. Extension springs are $120–$200. A double door is $300–$600. A conversion from extension springs to torsion springs is $400–$800. The wider national spread, about $120–$800, covers that extension floor at the low end and a conversion at the high end. A new door is the garage door guide. A coating on the slab is the garage floor guide. The apron outside is the driveway guide. These are typical planning ranges, not a survey and not a quote.

This page is the springs on one residential garage door at a single-family house. A bid may call it garage door spring replacement cost, the cost to replace a garage door spring, garage door spring repair cost, garage door spring cost, or torsion spring replacement cost. The springs and the labor are in the price when the number is the typical band. It is not a new garage door, which is the garage door guide. It is not a floor coating, which is the garage floor guide. It is not a driveway, which is the driveway guide. A spring from a shelf is a smaller product. This page does not price it as the typical band.

The price of the job is the springs the technician installs and the trip that puts them on the door. The type of spring is the first cut. Whether the labor is already in the price is the second. A torsion spring, an extension spring, and a pair are ways to buy the springs that one door uses. The pair replaces a single part the door does not balance on. It is not a second door under a price you already have.

The rows below are ways to read one job. They are not added together. The job table is one visit at a door the technician can reach. The typical band is the torsion springs, labor in: that row in full. Extension springs replace that rate from $120 to $200. A double door replaces it from $300 to $600. A conversion replaces it from $400 to $800. Use a part row only for a line the visit row does not include. A spring the proposal already includes is not a second spring.

Job	Typical cost
Extension springs, labor in	$120–$200
Torsion springs, labor in	$150–$350
Double-door springs	$300–$600
Extension-to-torsion conversion	$400–$800

Part or added line	Typical planning range
One spring, the part	$30–$70
Extension pair, the parts	$40–$80
Torsion spring and bar, installed	$200–$400
Springs and cables, installed	$200–$500
Carriage-style door springs	$200–$450
Insulated-door springs	$250–$400
Labor, when the bid prices the springs alone	$150–$250
Maintenance visit, not a replacement	$40–$80

The job rows replace one another. Do not add a double-door price on top of a torsion price for the same door. The part row is a line the visit left out. A spring the visit price already includes is not the part row on top. Labor the bid already folded into $150–$350 is not the labor row on top.

A torsion-spring visit — the springs and the labor — is typically $150–$350. The floor of the row is the typical floor. The top of the row is the typical top. The whole row is the typical band. One hundred fifty can be this row at its floor, an extension-spring visit inside its overlap, or labor at $150 when the bid prices the labor as the visit. Three hundred fifty can be this row at its top, a double door inside its overlap, or an insulated door inside its row. Ask which reading the bid is.

An extension-spring visit — the extension springs and the labor, often the springs beside the tracks on a tilt-up door — is typically $120–$200. The overlap with the typical band is $150–$200. One hundred twenty is the floor of this row and the floor of the wider spread, $30 under the typical floor. Two hundred is inside the typical band and $150 under the typical top. From $120–$150 the job sits under the typical band and inside the wider spread. From $150–$200 the job is inside the typical band and inside this row. One hundred twenty can be this row at its floor. It is not the typical band with a discount. Two hundred can be this row at its top or a torsion visit inside the typical band. Ask which springs the bid priced. Do not add the torsion row under an extension price for the same door.

A double-door visit — the springs on one wider sectional door, labor in — is typically $300–$600. The overlap with the typical band is $300–$350. Three hundred is $150 above the typical floor and the floor of this row. Six hundred is $250 past the typical top and $200 under the wider top. From $300–$350 the job is inside the typical band and inside this row. From $350–$600 the job has left the typical band and stays inside the wider spread. Three hundred can be this row at its floor or a torsion visit inside the typical band, which is the same $300. Six hundred can be this row at its top. It is not two single doors added under a $350 visit. A house whose price was already the one-door torsion visit does not get the double-door row on top.

A conversion — extension springs taken off, torsion hardware put on — is typically $400–$800. Four hundred is $50 past the typical top. Eight hundred is the top of this row and the top of the wider spread. The whole row sits above the typical band. It is not a torsion visit with a different name. Four hundred can be this row at its floor, an insulated-door spring job at its top, or a torsion bar at its top, which is the same $400. Eight hundred can be this row at its top. It is not a new garage door. A house whose springs were already torsion does not get this row on top.

Garage door spring replacement cost

Garage door spring replacement cost is this page when the springs are on the door and the labor is in the price. How much it costs to replace a garage door spring, for that visit, is the same price. A bid that says garage door spring replacement cost and a bid that says garage door spring cost are the same dollars when the springs, the door, and the labor match. The typical band, $150–$350, is the torsion springs on one door. It is not a second spring stacked on a visit you already have.

The visit is often about two hours. The hours are inside the visit price. They are not a second bill on a number that was already the springs. A bid that already names $150–$350 does not get two hours on top.

How much does it cost to replace a garage door spring

How much it costs to replace a garage door spring is the visit price, not the price of a spring on a shelf. For the torsion springs on one door, that cost is $150–$350. A bid that prices the technician and a bid that prices a boxed spring are not the same number. Keep the labor in the number when a technician is who changes the springs.

A second spring the same visit left out is another part, $30–$70, not a second $150–$350 visit. One hundred fifty plus $30 is $180, inside the typical band. One hundred fifty plus $70 is $220, inside the typical band. Three hundred fifty plus $30 is $380, which is $30 past the typical top, inside the bar row, inside the cable row, and $420 under the wider top. Three hundred fifty plus $70 is $420, which is $70 past the typical top, inside the cable row, and $380 under the wider top. A visit that already changed every spring on the door does not get a second part.

Two single doors are two jobs. One hundred fifty plus $150 is $300, which can be two floors added or one double door at its floor or one torsion visit inside this band. Three hundred fifty plus $350 is $700, which is $350 past the typical top, $100 past the double-door top, and $100 under the wider top. That $700 is two doors at the typical top. It is not one double door. Ask which reading the bid is.

Garage door spring repair cost

Garage door spring repair cost is the visit that deals with the spring, and a broken spring is a replacement. One door, torsion springs, labor in, is $150–$350. A bid that says garage door spring repair and a bid that says garage door spring replacement are the same dollars when the springs, the door, and the labor match. A price near $40 should say a maintenance visit, not the replacement. A price near $350 should say whether the number is the typical top or a double door inside $300–$600.

A maintenance visit — lubrication, a tension check, and a look at the door — is typically $40–$80. Forty dollars is $80 under the wider floor. Eighty dollars is $40 under that floor. The whole row sits under the wider floor. It is not a replacement someone discounted. A house that hires the spring replacement does not get this row on top of $150–$350.

A service-call minimum is typically $75–$100. Seventy-five is $45 under the wider floor. One hundred is $20 under that floor. The whole minimum sits under the wider floor. A completed spring price of $150–$350 already holds the trip. One hundred fifty plus $75 is $225 only when the $150 left the trip out. A bid that already names the installed springs does not get the minimum on top.

Garage door spring cost

Garage door spring cost is the installed springs, not a boxed spring with the labor left out. When the job is the torsion springs on one door, that cost is $150–$350. A price near $40 should say a part, or a maintenance visit, not a visit with the labor in. A price near $150 should say whether the labor and the springs are both in. One hundred fifty can be this band at its floor. It can also be labor at $150 when the bid calls the labor the visit. Those can be the same dollars and the same job, read two ways. They are not two bills.

The part alone, any one spring, is typically $30–$70. Thirty dollars is $90 under the wider floor. Seventy dollars is $50 under that floor. An extension pair, the parts, is typically $40–$80. Forty dollars is $80 under the wider floor. Eighty dollars is $40 under that floor. Every part row on this page sits under $120. Labor the bid leaves out, for the pair the door uses, is typically $150–$250. One hundred fifty is the typical floor. Two hundred fifty is inside the typical band and $100 under the typical top. The whole labor row sits inside the typical band. From $150–$250 the labor and the visit can be the same dollars. From $250–$350 the visit has left the labor row and stays inside the typical band. That overlap is not a second charge under a $150–$350 price.

Thirty dollars plus $150 is $180, inside the typical band. Seventy dollars plus $150 is $220, inside the typical band. Thirty dollars plus $250 is $280, inside the typical band. Seventy dollars plus $250 is $320, inside the typical band. Two parts at $70 plus labor at $250 is $390, which is $40 past the typical top, inside the bar row, inside the insulated row, and $410 under the wider top. A house whose price already includes the labor does not get the labor row. A shelf spring is not the installed row.

Torsion spring replacement cost

Torsion spring replacement cost is the torsion springs the technician puts on the door. One door, labor in, is $150–$350. A bid that says torsion spring replacement and a bid that says garage door spring replacement are the same dollars when the springs, the door, and the labor match. A price near $30 should say a part, not the visit. A price near $400 should say whether the number is a bar, an insulated door, or a conversion at its floor.

A torsion spring and the bar, installed, is typically $200–$400. The overlap with the typical band is $200–$350. Two hundred is $50 above the typical floor. Four hundred is $50 past the typical top and $400 under the wider top. From $200–$350 the job is inside the typical band and inside this row. From $350–$400 the job has left the typical band and stays inside the wider spread. A torsion visit that already includes the bar does not get this row on top.

Springs and cables, installed, are typically $200–$500. The overlap with the typical band is $200–$350. Five hundred is $150 past the typical top and $300 under the wider top. Carriage-style door springs are typically $200–$450. Four hundred fifty is $100 past the typical top and $350 under the wider top. Insulated-door springs are typically $250–$400. Two hundred fifty is $100 above the typical floor. Four hundred is the bar top and $50 past the typical top. These rows replace the one-door torsion visit when the door is that door. Two hundred can be a bar, a cable job, or a carriage door at its floor, or a torsion visit inside this band. Four hundred can be a bar at its top, an insulated door at its top, or a conversion at its floor. Ask which door the bid priced. Do not put an insulated row and a double-door row on one door.

What the range includes

The typical band assumes the torsion springs on one sectional door at a single-family house. The labor is in. The springs are in. The door is reachable. The day is a weekday. The torsion row, $150–$350, is the band. Extension springs are in the band only from $150 to $200. A double door is in the band only from $300 to $350. A bar, a cable job, and a carriage-style door are in the band only from $200 to $350. An insulated door is in the band only from $250 to $350. A conversion is not in the band. A part alone is not in the band. A maintenance visit is not in the band. Labor is in the band when that labor is the visit, from $150 to $250, and the rest of the typical band is the springs with that labor already inside. An opener, a new garage door, a floor coating, and a driveway are not in the band.

How long the work takes depends on the door and the access, and the bid’s schedule is the one that counts. A one-door spring visit is often about two hours, and often the same day. The hours are a way to read that visit. They are not a second clock on a price that was already the springs. The next year’s maintenance is not in this price. How long a spring lasts is not a number on this page.

The floor of the wider spread, $120, is an extension-spring visit. It is not a torsion visit someone discounted. The top, $800, is the top of a conversion. It is not the torsion row plus every add-on. Three hundred fifty plus $70 for a second part is $420, not $800. Three hundred fifty plus $350 for a second door is $700, not $800. A number above $800 should name an opener past this page, a new door, or a conversion that cleared the row. Ask which one.

None of the bands include the part alone, typically $30–$70, or an extension pair of parts, typically $40–$80. Thirty dollars is $90 under the wider floor because the shelf spring is not the installed visit. Eighty dollars is $40 under that floor. A visit that already includes the springs does not get this row on top.

None of the bands include labor on springs the bid priced alone, except where that labor is the visit itself. The labor line is $150–$250. One hundred fifty is the typical floor. Two hundred fifty is $100 under the typical top. An installed price does not get this row.

None of the bands include a maintenance visit, typically $40–$80. The whole row sits under the wider floor. A replacement that leaves the yearly check for another day does not get this row. A check that finds a broken spring is the replacement, not the check plus the replacement, unless the bid left the springs out.

None of the bands include an opener replacement, typically $300–$900. The overlap with the typical band is $300–$350. Three hundred can be an opener at its floor or a torsion visit inside this band or a double door at its floor. Nine hundred is $100 past the wider top. Three hundred fifty plus $300 is $650, which is $50 past the double-door top and $150 under the wider top, only when the spring visit left the opener out. Three hundred fifty plus $900 is $1,250, which is $450 past the wider top. A spring visit that leaves the opener alone does not get the opener row.

None of the bands include a new garage door, which is the garage door guide, often $2,000–$4,500 for a common double insulated steel door, inside a wider spread of about $800–$9,000. Eight hundred is the floor of that wider spread and the top of this page. One hundred fifty plus $2,000 is $2,150, inside that guide’s typical band. That sum is springs plus a new door. A door that already includes springs does not get this page on top. The new door brings its own springs.

None of the bands include a garage floor coating, which is the garage floor guide, often $2,500–$6,000 for a two-car garage, inside a wider spread of about $400–$14,000. One hundred fifty plus $2,500 is $2,650, inside that guide’s typical band. A coating on the slab is not a line on the spring visit.

None of the bands include a driveway, which is the driveway guide, often $4,000–$12,000 for a common single-car or two-car driveway, inside a wider spread of about $1,500–$25,000. One hundred fifty plus $4,000 is $4,150, inside that guide’s typical band. A driveway that has risen into the opening is that guide. A new spring will not fix it.

The band is the spring price. A coupon on the visit is not subtracted. Read the form before you take a number off the bid. A credit you have not received is not inside the planning range. This page does not price a coupon, and it does not name a percentage of the cost that comes back at resale.

Warranties are part of the contract, and this page is not a reading of one company’s form. A spring warranty commonly splits the part from the labor. Read it. The warranty is not a dollar line in the planning range.

A standard homeowners policy is built around sudden and accidental damage. A spring that wore out is the kind of repair those policies commonly leave with the owner. A car or a storm that damages the door, when the form responds to it, is a different question from springs you are replacing. Read the form before you treat the policy as the budget. The $150–$350 band is not an insurance estimate. A home warranty is a different contract. Neither one is inside the planning range.

A permit the city requires is a line on that bid. This page does not price a city’s fee on top of a complete spring price. A permit the proposal already includes is not a second permit.

As a cross-check, not a bid: torsion springs, labor in, are $150–$350, the typical band. Extension springs are $120–$200. A double door is $300–$600. A conversion is $400–$800. The part alone is $30–$70. If a bid and that reading are far apart, the bid is a different spring, a bar, cables, an opener, or a new door.

What moves the price

Driver	How it changes the bid
The visit	Torsion springs, labor in, are $150–$350, the typical band. Extension springs are $120–$200, and the typical band includes that row only from $150 to $200. A double door is $300–$600, and the typical band includes that row only from $300 to $350. A conversion is $400–$800 and sits above the typical band. The visit picks the row. It is not a second bill.
The part	One spring, the part, is $30–$70. An extension pair, the parts, is $40–$80. Both rows sit under the wider floor. The part reads the springs. It is not added on top of a visit that already includes them.
The labor	Labor the bid prices as the whole visit, for the pair, is $150–$250, inside the typical band. Thirty dollars plus $150 is $180. Seventy dollars plus $250 is $320. An installed price does not get the labor line again.
The door	A standard sectional door is the torsion row. An insulated door is $250–$400. A carriage-style door is $200–$450. A double door is $300–$600. The door picks one row. An insulated double is not the insulated row plus the double row.
The hardware	A torsion bar is $200–$400. Springs and cables are $200–$500. A visit that already includes that hardware does not get the row again. Four hundred can be the bar at its top or a conversion at its floor.
A second spring or a second door	A second spring the visit left out is $30–$70. Three hundred fifty plus $70 is $420. A second single door at the typical top is $350 plus $350, which is $700, past the double-door top.
The opener	An opener replacement is $300–$900. The overlap with this band is $300–$350. Nine hundred is $100 past the wider top. A visit that leaves the opener alone does not get that row.
The door itself	A new garage door is $2,000–$4,500 on the garage door guide, inside a wider spread of about $800–$9,000. Eight hundred is this wider top and that guide’s floor. A door that includes springs does not get this page on top.
The slab and the apron	A garage floor coating is $2,500–$6,000 on the garage floor guide. A driveway is $4,000–$12,000 on the driveway guide. A spring that leaves them alone does not get those rows.
Access	A door the technician can reach on a weekday is the visit this page prices. Low headroom, a detached garage with a long carry, a high-cost metro, and a second trip can clear the top of the typical band on a one-door job.

The type of spring is the first cut, and it is not a rate you add to itself. An extension visit at $180, a torsion visit at $180, and labor at $180 can share those dollars. They are not the same spring three times. One hundred eighty is inside the extension row, inside the typical band, and inside the labor row. Ask which reading is in the price.

The labor is the second cut. A visit at $250 and labor at $250 can share those dollars. One is the typical band. One is the labor row at its top. The higher number is not a typical visit that someone misread as a second spring.

The same one-door torsion visit in a lower-cost area and in a high-labor city can sit at opposite ends of $150–$350 without either bid being wrong. Ask whether the price is the springs, the labor, or both, and ask whether a bar, cables, or a second door is in. Garage door replacement, a garage floor coating, and a driveway are the projects that meet this door and are not the springs. Price them on their own pages. Two bids that disagree about the spring type, the labor, and whether the cables are included are not the same job.

DIY or hire

Hire the springs. A torsion spring is wound under enough tension to break a bone. An extension spring that lets go can leave the track. The winding bars, the match to the door’s weight, and the cables are the job. A weekend swap is where those three get missed.

A part on a shelf is a different product. The part alone is $30–$70. An extension pair, the parts, is $40–$80. Neither number is the installed rate on this page. On the one pro visit, the torsion job is $150–$350. That is the springs and the labor together.

Do not treat a boxed spring as the visit. If the door still has to be unwound, you are pricing a technician’s job without the technician. The person who changes the springs should say what happens if the cable or the opener is the part that failed.

Repair or replace

Replace the springs when the door sections are straight and the door still tracks. That job is the typical band, $350 at the top and $150 at the floor, when the method is that visit. A quote near $40 should say a maintenance visit, not a technician replacing springs. A quote near $120 should say extension springs at the floor of that row. A quote near $150 should say whether the labor and the springs are both in. A quote near $350 can be a torsion job at its top, a double door inside its overlap, or an insulated door inside its row. Ask which reading the bid is.

Price extension springs on $120–$200. Price a double door on $300–$600. Price a conversion on $400–$800, and do not read that conversion as the one-door torsion band with a different name. Do not read a new garage door as the spring band with a different name.

Send a door with bent or rusted panels, or springs, cables, and tracks that have all aged out together, to the garage door guide, typically $2,000–$4,500 for a common double insulated steel door. Send the slab to the garage floor guide, typically $2,500–$6,000. Send the apron to the driveway guide, typically $4,000–$12,000. If the same season includes any of those, they are separate scopes. Do not fold them into the spring price.

How long a spring lasts is not a number on this page. A one-door spring visit is not a warranty that the opener will keep lifting. A new door is not a warranty that a spring will never break again. The bid’s scope is the work you bought.

How to use this number

Ask two or three garage-door companies for a written price that names the spring type, whether the price is a lump sum, whether the springs and the labor are both included, whether both springs on the door are included, whether the cables and the bar are included, and what happens if the opener is the part that failed. Compare torsion springs, labor in, with $150–$350. Compare extension springs with $120–$200, a double door with $300–$600, and a conversion with $400–$800. Keep the springs and the labor inside those rows. Put a left-out part at $30–$70, an extension pair of parts at $40–$80, and labor on shelf springs at $150–$250, on their own lines.

A very low bid on one installed torsion door is a reason to ask whether the labor and both springs are included, not a reason to celebrate. A quote near $70 should say a part, not a technician. A quote near $150 should say whether the labor is in. A high bid should point at a double door, a conversion, a bar, cables, an opener, low headroom, or the labor market. Two or three local bids on the same springs, the same door, and the same house are the number that matters. How this site sets the band is explained on the methodology page.